how to solve roblox cube

by Esperanza Powlowski DDS 8 min read
image

The cube is solved Hold the cube in your hand with an unsolved corner on the front-right-top corner, then do the algorithm below twice or four times until that specific piece is oriented well: R' D' R D It will look like you've messed up the whole cube but don't worry, it will be all right when all the corner pieces are oriented.

Part of a video titled How to solve a Rubik's cube | The Easiest tutorial | Part 1
4:19
12:55
Position.MorePosition.

Full Answer

How do I use the Cube solver?

The cube solver will alert you if your configuration is not correct. Pressing the Solve button will leave the scramble page open and open the solution page in a new browser tab. This will allow you to come back to make adjustments if something is wrong.

How to solve a Rubik's cube?

However, once you know a few algorithms, it is very easy to solve. The method described in this article is the Layer by Layer method also known as the Beginner's Method: first you solve one face of the cube (first layer), then the middle layer, and finally the last layer. Familiarize yourself with the Notations at a later step in the article.

How do you solve the cross on a cube?

The color that the edges have must line up with both the white center and the center on the sides of the cube. The cross only needs a maximum of eight moves to become solved. (five or six in general). If you put a white edge piece in the correct place but it is flipped around, then try popping it out of the top layer and reinserting it correctly.

How do you solve a cube with yellow corners?

Orient yellow corners It fixes the white edges, corners then flips the cube to solve the second layer and finally completes the yellow face. F: front, R: right, U: up, L: left, D: down.

image

What is the trick to solve cube?

2:119:16How to ACTUALLY Solve A Rubik's Cube In 5 Seconds - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst. You build a cross. Then you solve the first two layers or f2l. By forming pairs of piecesMoreFirst. You build a cross. Then you solve the first two layers or f2l. By forming pairs of pieces that go in the slots left by your cross. And solving each of those four pairs.

How do you win a cube on Roblox?

1:473:33How to solve a rubik's cube in 2 EASY MOVES! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that's all you need to do is go left up left up left up left up and then once you do this you canMoreSo that's all you need to do is go left up left up left up left up and then once you do this you can start getting the hang of it.

What are the 7 steps to solving a Rubik's cube?

How to Solve a Rubik's Cube: 7-Step GuideStep 1: Create White Cross. Begin by holding the cube with the white face up. ... Step 2: Solve White Corners. ... Step 3: Solve Middle Layer. ... Step 4: Create Yellow Cross. ... Step 5: Swap Yellow Edges in Top Layer. ... Step 6: Position Yellow Corners. ... Step 7: Solve Final Layer Corners.

How do you solve 2xw?

1:146:11Learn How to Solve a 2x2 Rubik's Cube (Beginner Tutorial) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you're going to repeat that until this corner is solved. So do we see white on the bottom here noMoreSo you're going to repeat that until this corner is solved. So do we see white on the bottom here no we don't so we're going to repeat. And this is white on the bottom.

Can you solve a Rubik's Cube in 2 moves?

0:332:51SOLVE ANY RUBIK'S CUBE IN 2 MOVES?! - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing just two moves. And you're just going to repeat these moves over and over again you're goingMoreUsing just two moves. And you're just going to repeat these moves over and over again you're going to turn the left. Side counterclockwise. And then you're going to turn the top clockwise.

Who invented Rubik's Cube?

Ernő RubikRubik's Cube / InventorErnő Rubik is a Hungarian inventor, architect and professor of architecture. He is best known for the invention of mechanical puzzles including the Rubik's Cube, Rubik's Magic, Rubik's Magic: Master Edition, and Rubik's Snake. Wikipedia

How do you solve a Rubik's Cube in 4 moves?

0:271:25How to Solve the Rubik's Cube in 4 Moves - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight up top left right down top right and then you move the cube to the left. And you do exactlyMoreRight up top left right down top right and then you move the cube to the left. And you do exactly the same thing to it Souls.

1. White cross

Let's begin with the white face. First we have to make a white cross paying attention to the color of the side center pieces. You can try to do this without reading the instructions.

2. White corners

In this step we have to arrange the white corner pieces to finish the first face. If you are very persistent and you managed to do the white cross without help then you can try to do this one as well. If you don't have patience I'll give you some clue.

3. Second layer

Until this point the procedure was pretty straight forward but from now on we have to use algorithms. We can forget the completed white face so let's turn the cube upside down to focus on the unsolved side.

4. Yellow cross

Sart solving the last layer making a yellow cross on the top of the cube. It doesn't matter if the pieces are not on their final places so we don't have to pay attention to the colors of the sides.

5. Yellow edges

After making the yellow cross on the top of the cube you have to put the yellow edge pieces on their final places to match the colors of the side center pieces. Switch the front and left yellow edges with the following algorithm:

6. Yellow corners on their places

Only the last layer corners are left unsolved. First we have to get them to the right spot, so don't worry about the orientation in this step.

7. Orient Yellow Corners

All pieces are on their right places you just have to orient the yellow corners to finish the puzzle. This proved to be the most confusing step so read the instructions and follow the steps carefully.

Notation

If you're still reading, congratulations on not being put off by the time requirements! The first thing you are going to need to know about solving the cube is how the turns you make can be represented by letters. Later on in this guide, you're going to need a few algorithms.

Step 1: The Cross

The cross is the first step in the actual solution of the puzzle. This step can be a bit confusing at first, so make sure you read this a few times whilst attempting it yourself. The image shows the end goal of this step.

Step 2: The White Corners

Now you've done the edges on the white face, all that's left are the corners. This step is much simpler, as it only requires one algorithm. The picture shows the end goal of this step.

Step 3: Middle Layer Edges

You're 1/3 done (kinda)! You're done with all white pieces, so you can now flip your cube so white is on the bottom.

Step 4: Yellow Cross

We're nearly there now. 2/3 of the puzzle is solved, and every piece left to be solved has yellow on it somewhere. That's a good sign… right?

Step 5: Sune and Antisune

Sune is a very simple algorithm that many puzzlers love due to its simplicity compared to other algorithms that they may have had to learn. There are 7 different corner positions possible after you have oriented the edges. Sune and Antisune are two of these, but we won't always get them straight away.

How to solve a cube with a cross?

Place the cross at the bottom. Turn the cube over 180° so that the cross is now on the bottom. 4. Solve the four corners of the first layer, one by one. You should also be able to place the corners without needing algorithms. To get you started, here is an example of one corner being solved: ...

How to solve a cube layer by layer?

The method described in this article is the Layer by Layer method also known as the Beginner's Method: first you solve one face of the cube (first layer), then the middle layer, and finally the last layer. Steps.

How many moves does a cross need to be solved?

The cross only needs a maximum of eight moves to become solved. (five or six in general). If you put a white edge piece in the correct place but it is flipped around, then try popping it out of the top layer and reinserting it correctly.

What to do if edge piece is in middle layer?

If the edge piece is in the middle layer but in the wrong place or with the wrong orientation, simply use the same algorithm to place any other edge piece in its position. Your edge piece will then be in the last layer, and you just have to use the algorithm again to position it properly in the middle layer. 2.

How to solve a scrambled Rubik's Cube?

The online Rubik's Cube™ solver calculates the steps needed to solve a scrambled Rubik's Cube from any valid starting position. Enter the colors of your puzzle and click the Solve button. Wait for the program to find the solution then follow the steps to solve your cube.

How to set up a scrambled cube?

The easiest way is to use the color picker. Select a color on the palette then paste it on the surface of the puzzle. Click more than once on a field to deactivate the color palette and cycle through the colors as you keep clicking the fields of the puzzle.

image